19
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
OPERATION VIA SACN
Starting from the main display, press MENU to enter the main menu. Using
and
, select the
Control
menu and press ENTER. Now select the menu item
sACN
and confirm again.
Information on the submenu items in the sACN menu and the corresponding setting options can
be found in the table below (select with
and
confirm with ENTER, change value or status
with
and
confirm with ENTER).
sACN
DMX Address
001 - 4xx
Setting the DMX start address
DMX Mode
33CH / 36CH /
50CH
Selecting the DMX mode
Universe
000–255
Setting the universe
Universe Group 000–127
Setting the Universe Group
IP Address
xxx.xxx.xxx.xxx.
xxx
Setting the IP address: Set 1st block, confirm, Set 2nd block,
confirm..
Subnet Mask
xxx.xxx.xxx.xxx.
xxx
Setting the subnet mask: Set 1st block, confirm, Set 2nd
block, confirm..
W-Transmitter
On
Activate (On) or deactivate (Off) forwarding of the DMX signal
via W-DMX.
Off
Force to pair
Establish a connection with other W-DMX units (Force to pair)
or disconnect (Unlink all).
Unlink all
Signal Routing
Send to XLR
Forwarding the control signal to XLR Out
Backup by XLR Control via XLR with ArtNet signal interruption
Receive only
No connection between network signal and XLR connectors
EDIT SCENE
Eight scenes are available (Scene 1 - 8). Set pan, tilt, gobo, pan / tilt macros etc. of each scene
individually directly on the unit with values from 000 to 255. The scenes are pre-programmed ex
works.
