21
DEUTSCH
ENGLISH
DMX
FRANCAIS
ESP
AÑOL
IT
ALIANO
POLSKI
SYSTEM SETTINGS (Settings)
Starting from the main display, press ENTER to go to the main menu. Use the and control
keys to select the
System Settings
menu and press ENTER.
Display
DMX Fail
Dimmer Curve
LED Frequency
Motor
Movement
Fan
512
This will take you to the submenu for setting the submenu options, see table (select via and ,
confirm via ENTER, change status via and , confirm via ENTER):
Settings (bold = factory setting)
Display
Display
settings
Reverse
OFF
No rotation of the display
ON
Display is rotated through 180° (e.g. for
overhead installation)
Backlight
OFF
Deactivation of the display lighting after
approx. 30 seconds of inactivity
ON
Display lighting permanently on
DMX Fail
Operational
status with
DMX signal
fault
Black
Activates blackout
Hold
Last command is retained
Auto
activates Auto mode
Dimmer
Curve
Selection of
the dimmer
curve
Linear
Light intensity increases linearly with DMX
value
Exponential
Light intensity can be finely adjusted at
lower DMX values and broadly adjusted at
higher DMX values
Logarithmic
Light intensity can be broadly adjusted at
lower DMX values and finely adjusted at
higher DMX values
S-curve
Light intensity can be finely adjusted at
lower and higher DMX values and broadly
adjusted at medium DMX values
LED Fre-
quency
Configuration
of LED PWM
frequency
650 Hz
, 1530 Hz,
3600 Hz, 12 kHz, 18.9
kHz, 25 kHz
