10
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
MAIN DISPLAY SLAVE AND STATIC MODE
The top line of the display shows whether a control signal is available on the device and the middle field shows the SLAVE or STATIC mode
with the selected scene (Run Scene x). The bottom line displays the temperature of the LED unit, the fan mode and W-DMX status. If the
control signal is interrupted in slave mode, the characters in the display start flashing and “None” is shown after “Controlled by” in the top
line (no signal); when the control signal is available again, the flashing stops.
W-DMX™
To pair a W-DMX receiver with a W-DMX compatible transmitter, the Reset command must be executed in the menu item WDMX under
Receiver (select Reset and confirm). The receiver is now in pairing standby and waiting for a pairing request from a transmitter. Start the
pairing by selecting Link in the menu of the transmitter and confirming; the pairing now takes place automatically. In the same way, several
receivers can be paired simultaneously or one after the other to a transmitter (e.g. for master / slave operation). A W-DMX connection is
always maintained until the connection is disconnected by means of the Reset command in the receiver or the Unlink command in the
transmitter, regardless of whether a device has been disconnected from the power supply in the meantime.
W-DMX™ STATUS
W-DMX
deactivated
W-DMX
as receiver
activated,
not paired
W-DMX
as receiver
activated
and
paired,
Transmitter
switched off
or out of
range
W-DMX
as receiver
activated
and
paired,
no
DMX signal
W-DMX
as receiver
activated
and
paired,
DMX signal
is present
W-DMX
as trans-
mitter
with G3
standard
activated,
DMX signal
is present
W-DMX
as trans-
mitter
with G4s
standard
activated,
DMX signal
is present
W-DMX
as trans-
mitter
with G3
standard
activated,
no
DMX signal
W-DMX
as trans-
mitter
with G4s
standard
activated,
no
DMX signal
The following is a description of how to operate the spotlight using the rotary-push encoder and the BACK button next to the display.
Enter
Back
DMX Address
001
55ch Mode
Next: 056
030°C
Fan Auto
Controlled by DMX
(W-DMX)
Art-Net
(sACN)
55ch Mode
DMX Address 001
Universe 000
IP Address 192.168.000.150
Subnet Mask 255.255.255.000
Next: 056
030°C
Fan Auto
Controlled by Art-Net
(sACN)
SLAVE
030°C
Fan Auto
Controlled by Master
(None)
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
030°C
Fan Auto
Controlled by ______
DMX Address
001
55ch Mode
Next: 056
030°C
Fan Auto
Controlled by DMX
!
!
!
!
Temperature of the LED unit
Fan mode
W-DMX status
A warning triangle is displayed in
the event of malfunction. Tap for
further information
Control signal display
Tap -> main menu
Operating mode
