Cameo CLIF1700PRO User Manual Download Page 7

Page: 7 / 64

DMX

DEUTSCH

FRANCAIS

ESP

AÑOL

ENGLISH

ALIANO

POLSKI

FLUID HOSE

Fluid hose with hose nozzle and black sealing ring. Connect the fluid hose to the canister cover by inserting thehose nozzle into the quick

connector until the locking mechanism engages. Make sure that the connection is tight. To release the fluid hose, press the spring-loaded

release button (no. 11).

RELEASE BUTTON

To release the fluid hose from the special cover, press the spring-loaded release button (no. 11) of the quick connector.

VENTILATION VALVE

Ventilation valve with corresponding hose.

INTAKE HOSE

Intake hose with sinter filter.

Before replacing the canister or refilling fog fluid, disconnect the fog machine from the power supply (remove the power plug).
The special canister cover with ventilation valve and intake hose, suitable for 5l Cameo fog fluid canisters, included in delivery (canister not

included). Place a full Cameo fog fluid canister upright in front of the fog machine and unscrew the canister lid. Now take the included spe-

cial cover and insert the hose of the ventilation valve and the intake hose (no. 12 and 13) into the canister and screw the special cover tight

to the canister. The sinter filter on the intake hose ensures that contaminant particles do not get into the system and that the hose end is

always at the lowest point of the canister. Now set the canister into the canister compartment and connect the fluid hose of the fog machine

on the special cover (see no. 10). To remove a fluid canister, please first loosen the fluid hose from the special cover.

OPERATION

NOTES

• After connecting to the power supply, “Welcome to Cameo”, the model designation, and the software version will display one after the

other. At the same time, the vaporizer will heat up (approx. 7 minutes), during which “Heating ...” will be shown on the display; system

settings can be applied as needed during this time.
• After the heating phase is complete, “Ready!” will display briefly and then the operating mode previously selected will activate.
• When the heat-up phase is complete, fog will only release when the main screen shows one of the available operating modes (DMX,

Stand Alone, Timer, Slave mode); the fog discharge halts automatically as soon as one of the menu options is chosen from the options menu

or submenu in order to prevent injury from the discharged fog.
• Do not operate the fog machine without fog fluid! When the canister runs out during use, the fluid pump is switchedoff automatically

for protection purposes, and “Low Liquid Protection” is shown on the display. Disconnect the fog machine from the power supply before

changing the canister or filling it with fog fluid. Then, use the “Instant Fog” function (maximum fog discharge) in order to completely fill the

fluid hose with fog fluid again, in order to prevent the automatic pump switch-off from reactivating.
In order to remove fluid residue in the vaporizer system of your fog machine and thus ensure a long service life, clean the vaporizer system

regularly (approx. every 60 operating hours). To do so, use the special Cameo cleaning fluid for fog machines and follow the instruction on

the bottle label.

SETTING THE DMX START ADDRESS (DMX Address)

You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the “DMX Address” menu option and

confirm via ENTER. Use the UP and DOWN keys to set the desired DMX start address (001 - 510) and confirm this entry via ENTER. The main

screen now displays the operating mode and DMX start address and automatically activates the DMX operating mode.

DMX address

001 - 510

DMX mode

DMX address: xxx

ENTER

UP/DOWN