8
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Main display
Stand Alone
Stand Alone
Pump
ENTER
UP/DOWN
ENTER
Pump Value
1% - 100%
ENTER
Stand Alone mode
Pump Value: x%
TIMER MODE (Timer)
Timer mode makes it possible to manually configure the fog discharge of the device using values of 1% to 100%, as well asthe output
duration and the interval at which the discharge is to begin. You can access the options menu by pressing MODE. Using the UP and DOWN
control keys, now select the “Timer” menu option and confirm via ENTER. Now select between “Timer Pump” (output quantity), “Timer
Duration” (output duration), and “Timer Interval” (output interval) via UP and DOWN, confirm with ENTER, and set the desired value using UP
and DOWN respectively. Confirm each entry via ENTER.
Timer
ENTER
UP/DOWN
Main display
Timer mode
Duration/Interval xSec
ENTER
Timer
Pump
Pump Value
1% - 100%
ENTER - UP/DOWN
/
/
Timer
Duration
Duration Time
1sec - 60sec
ENTER - UP/DOWN
ENTER
Timer
Interval
Interval Time
1sec - 60sec
ENTER - UP/DOWN
ENTER
SLAVE MODE (Slave)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the “Slave” menu option and confirm
via ENTER. Connect the slave and master unit (same model, same software version) using a DMX cable (Master DMX OUT - Slave DMX IN),
and activate Stand Alone or Timer mode on the master unit. The slave unit will now follow the master unit.
ENTER
Slave
Slave mode
Main display
DEVICE SETTINGS (Settings)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the “Settings” menu option (note
arrow) and confirm via ENTER.
ENTER
Settings
This will take you to the submenu for setting the following submenu options (select via UP and DOWN, confirm via ENTER, change status via
UP and DOWN, confirm via ENTER):
