CAME VER10DMS, Manual

Page: 46 / 112

P
age
18
- Manual
FA01768-EN
- 07/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
PROGRAMMING
Programming button functions
1 ESC button
The ESC button is used to perform the operations described below.
Exit the menu
Delete the changes
Go back to the previous screen
2
< > buttons
The <> buttons are used to perform the operations described below.
Navigate the menu
Increase or decrease values
3 ENTER button
The ENTER button is used to perform the operations described below.
Access menus
Confirm choice
Outside the menu, the ESC key stops the gate and the < > keys open and close the gate.
Getting started
Once the electrical connections have been made, proceed with commissioning. Only skilled and qualified staff may perform this operation.
Make sure that there are no obstacles in the way.
Power up the device and begin programming.
Start programming with the functions indicated below.
F1 Total stop
A3 Travel calibration
To calibrate the device, position the opening mechanical stop in contact with the slide and fasten it in place.
Complete programming and check the warning and safety devices are working properly.
Press the ESC button or STOP button immediately in the event of any faults, malfunctions, strange noises or vibrations, or unexpected behaviour in the
system.
Functions menu
Total stop
This stops the operator and excludes automatic closing. Use a control device to resume movement.
With the input open, this function excludes all commands, including any automatic closing.
F1 OFF (Default)
ON