P
age
26
- Manual
FA01610-EN
- 08/2021 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
RSE1
Configure the function to be performed by the card inserted in the RSE1 connector.
Configuration>
RSE communication
RSE1
Paired
Alternate
Off
RSE2
Configure the function to be performed by the card inserted in the RSE2 connector.
Configuration>
RSE communication
RSE2
Off
CRP (Default)
I/O module
RTU Modbus
CRP address
Assign a unique identification code (CRP address) to the control board. It is used where there are multiple operators connected via CRP.
Configuration>
RSE communication
CRP address
1 to 254
RSE1 speed
Set the remote connection system communication speed on the RSE1 port.
Configuration>
RSE communication
RSE1 speed
4800 bps
9600 bps
14400 bps
19200 bps
38400 bps (Default)
57600 bps
115200 bps
RSE2 speed
Set the remote connection system communication speed on the RSE2 port.
Configuration
RSE communication
RSE2 speed
4800 bps
9600 bps
14400 bps
19200 bps
38400 bps (Default)
57600 bps
115200 bps
Save data
Save user data, timings and configurations to the memory device (memory roll or USB key).
The function is displayed only when a USB stick is inserted into the USB port or when a memory roll card is inserted into the control board.
Configuration>
External memory
Save data
Confirm? NO (Default)
Confirm? YES
