MASTER
SLAVE
MASTER
SLAVE
MASTER
SLAVE
p.
2
6
26
- M
an
u
al
c
od
e:
F
A
0
0
1
2
4
-E
N
FA
0
0
1
2
4
-E
N
v.
3
- 04/
2
0
17 - © C
am
e S
.p.
A
. - T
h
e m
an
u
al
's c
onte
nts m
ay b
e e
d
ite
d at a
ny ti
m
e w
ith
ou
t n
oti
ce
.
PAIRED CONNECTION
Important! First do the following on both operators:
- insert the RSE card (with the dipswitches set to OFF) on the panel connector on both operators.
- connect the two boards with a CAT 5 cable (max. 1,000 m) to terminals A-A / B-B / GND-GND; see CONNECTION FOR PAIRED OR ALTERNATE
OPERATION)
- connect all command and safety devices on the MASTER operator panel.
Important! Deactivate the F 19 function (automatic closing time) on the panel on the SLAVE operator.
Saving
Follow the procedure for entering a user with the OPEN and PARTIAL/PEDESTRIAN OPENING command on the MASTER panel.
Confi guring the MASTER operator
Select function F 49. Press ENTER to confi rm.
Select 1 (paired) and press ENTER.
Parameter transfer from MASTER to SLAVE
Select function F 52 on the MASTER panel.
Select 1 and press ENTER.
Programming
Set the following functions on both barriers:
- motor type (A1);
- motor test (A2);
- total stop (F1);
- travel calibration (A3).
Proceed with setting and adjusting the MASTER panel.
Function modes
STEP-BY-STEP or OPEN command Both booms open.
PARTIAL/PEDESTRIAN opening command. Only the boom on the MASTER barrier opens.
For information on the types of command that can be selected and associated with users, see the section ENTERING A USER WITH AN ASSOCIATED
COMMAND.
