P
age
33
- Manual
FA01795-EN
- 03/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Save data
Save user data, timings and configurations to the memory device (memory roll).
Configuration >
External memory
Save data
Read data
Upload user data, timings and configurations to the memory device (memory roll).
Configuration >
External memory
Read data
Parameter reset
Restore the factory configurations except for: [users], [timers], [motor type], [CRP address], [RSE speed], [password], [language], [time format] and the settings
related to the travel calibration.
Configuration
Parameter reset
Confirm? NO
Confirm? YES
Guided procedure (Wizard)
You can use the system configuration wizard.
Configuration
Guided procedure (Wizard)
New user
Register up to a maximum of 1000 users and assign a function to each one.
The operation can be carried out by using a transmitter or a BUS selector device (e.g. a keypad or transponder reader). The board that manages the
control devices (AF) must be inserted into the connector.
Manage users
New user
Choose the function to be assigned to the user.
Step-by-step
Sequential
Open
Partial opening
B1-B2 output
Press ENTER to confirm.
You will be asked to enter your user code. Send the code from the control device
(transmitter, keypad or transponder).
Repeat the procedure to add other users.
Remove user
Remove one of the registered users.
Manage users
Remove user
Use the arrows to choose the number associated with the user you want to remove.
Alternatively, you can select a user by sending a command from the associated
device.
Press ENTER to confirm
Confirm? YES
Confirm? NO
Remove all
Remove all registered users.
Manage users
Remove all
Confirm? NO
Confirm? YES
