Cambridge Sensotec Rapidox 1100E Oxygen Analyser Instruction Manual
Version 3.8
20
Last printed 29/08/2012 16:01:00
The user can choose whether to use ppm or percent notation to edit the O
2
text
boxes by selecting the UNITS menu and clicking on ‘Percent’ or ‘ppm’. To access
a field, either click inside it or use the TAB key to scroll through them. The field
parameters are as follows:
7.5.1
Config 1 Screen
1)
Oxygen Range: Not available for the Rapidox 1100E
2)
Oxygen Units: See Section 6.9 for a full description. Use the drop down
box to select AUTO%, PPM, PRESSURE or N2 BALANCE. The default
setting is AUTO%.
3)
Temperature Units: Not available for the Rapidox 1100E.
4)
Pressure Units: See sections 6.9 for a full description. Use the drop down
menu to select MBAR, BAR, PSI, TORR or KPa as the unit for pressure
measurement. The default setting is MBAR.
5)
Pressure Correction Mode: See section 6.12 for a full description. Use the
drop down menu to select NONE or AUTOMATIC. The default setting is
AUTOMATIC.
6)
Operating Mode: Not available for the Rapidox 1100E
7)
Auxiliary Output Parameter: This is fixed to PRESSURE on the Rapidox
1100E and is therefore not adjustable in the software.
8)
LCD Refresh interval: Use the drop down menu to select a refresh rate for
the LCD (min 0.1, max 1.5 sec). The default is 0.3 seconds.
9)
LCD Second Line Option: See section 6.10 for a full description. Use the
drop down menu to select Pressure, Date/Time or None.
10)
Pump Flow Rate: See section 6.4 for a full description. Use the drop down
menu to select a pump flow value from 10 to 100% or OFF.
11)
Password option: See section 6.5 for a full description. The password is
factory disabled and set to ‘0000’. Use the drop down menu to enable or
disable the password feature and the password box ‘****’ can be used to
enter a new password. Note that you will be prompted to enter the original
password if you wish to make changes to the password or its status.
Summary of Contents for SENSOTEC Rapidox 1100E
Page 46: ......
