Cambridge Sensotec Rapidox 1100E Oxygen Analyser Instruction Manual
Version 3.8
17
Last printed 29/08/2012 16:01:00
look like this:
Cambridge
Sensotec Ltd
Rapidox 1100E
Oxygen Analyser
S/N: 2100942
FW v 01.02.03.09
7
Rapidox Software Instructions
7.1
Software Installation
It is possible to program a range of variables to the Rapidox using an RS232 (or
RS485 if configured) link with a PC running MS-Windows (all versions) and the
supplied Rapidox software. The software is installed automatically by inserting
the Rapidox CD into the CD-ROM drive. If auto-installation does not start then
you can click the Windows START button and select RUN. Type ‘X:\setup.exe’
where X is the drive letter of your CD. Alternatively access the CD from Windows
Explorer or the ‘My Computer’ icon on your desktop, and double-click on the
‘Setup.exe’ programme. Follow the on-screen instructions to install the
programme onto the hard drive. Once installed, you can access the programme by
clicking START - PROGRAMS – Rapidox Software. The software has been tested
successfully on most language machines including Chinese & Japanese.
Please note that this software is generic and will work on several different Rapidox
versions. Therefore not all the functions will be enabled for your Rapidox 1100E.
7.2
Getting Started
Make sure that the Rapidox is connected to a free serial port on the rear of your
computer. These will nearly always be COM1 or COM2 but the software will scan
through the ports until it finds the Rapidox. The analyser must be switched on for
this to succeed and while you are communicating with it. On start up the
software will locate the Rapidox and display the following page. The values
displayed in the columns of boxes above the ‘Read’ and ‘Write’ buttons may differ
from those shown. NOT ALL features are available with this model.
Summary of Contents for SENSOTEC Rapidox 1100E
Page 46: ......
