background image

®

Dolby, Pro Logic and Dolby Digital (AC-3) are registered trademarks of Dolby Laboratories Licensing Corporation

Tower, Model Six and Model Seventeen are trademarks of Cambridge SoundWorks, Incorporated

®

Ensemble, Ambiance and Cambridge SoundWorks are registered trademarks of Cambridge SoundWorks, Incorporated

Powered Subwoofer

To the original purchaser,

Cambridge SoundWorks, Inc. will
warrant the 

Powered Subwoofer

 to

be free of defects in material and
workmanship for a period of two
(2) years from date of purchase.
With respect to defects, Cambridge
SoundWorks will, at its option,
replace the product or repair the
defect in the product with no
charge to the original purchaser
for parts or labor. During the
period from three (3) years
through ten (10) years, Cambridge
SoundWorks will, at its option,
repair or replace the defective
product for a cost to the original
purchaser of no more than $50.00
for parts and labor.

Slave Subwoofer

To the original purchaser, Cam-

bridge SoundWorks, Inc. will
warrant the 

Slave Subwoofer

 to be

free of defects in material and
workmanship for a period of ten
(10) years from date of purchase.
With respect to defects, Cambridge
SoundWorks will, at its option,
replace the product or repair the
defect in the product with no
charge to the original purchaser
for parts or labor.

These warranties do not extend

to any defect, malfunction or
failure caused by misuse, abuse,
accident, faulty hook-up, defective
associated equipment or use of the
speaker with equipment for which
it is not intended, such as con-
necting any speaker other than a

Slave Subwoofer

 to the 

Powered

Subwoofer’s 

“Slave Subwoofer

Output.”

Each of these two warranties is

the sole and express warranty of
the product named in its title, and
is in lieu of all other warranties,
expressed or implied, of merchant-
ability, fitness for purpose or
otherwise. In no event shall Cam-
bridge SoundWorks be liable for
incidental or consequential dam-
ages or have any liability with
respect to defects other than the
obligations set forth herein.

To ensure warranty coverage it

is incumbent upon the original
purchaser to inform Cambridge
SoundWorks or any of its Autho-
rized Service Agencies of the
defect within the warranty period.
The only acceptable method of
establishing warranty status is a

11

copy of the original proof of
purchase indicating customers
name and date of purchase.

Upon notification by the pur-

chaser and reaching agreement
with the purchaser that there is a
defect, Cambridge SoundWorks
will issue a Return Authorization
Number for the product. The
purchaser will return the product
to the address below, freight
prepaid by the purchaser. The
product shall have the Return
Authorization Number clearly
marked on the outside of the
package. The package must
include a copy of the original
proof of purchase. Please do not
return either the 

Powered

Subwoofer

 or the 

Slave Subwoofer

to Cambridge SoundWorks with-
out prior authorization from
Cambridge SoundWorks.

For warranty information

contact:

Cambridge SoundWorks, Inc.

311 Needham St.

Newton, MA 02464

1-877-YES-HIFI

(1-877-937-4434)

www.cambridgesoundworks.com

email:

[email protected]

Limited Warranty

Summary of Contents for Powered Subwoofer
















Reviews: