background image

5

system requires. It is also the rea-
son why the subwoofer need not be
located particularly close to other
speakers or aimed directly at the
listeners. The 

Powered Subwoofer

should be positioned vertically
(stick-on feet are provided for
attachment once you have decided
on its final orientation). It can sit in
a variety of positions within the
listening room, although we don’t
recommend placing it behind listen-
ers. Also, do not place the 

Powered

Subwoofer

 underneath furniture.

Make sure there is a clear air space

of at least 18 inches surrounding
the 

Powered Subwoofer

. Don’t

place objects on the 

Powered

Subwoofer

 (such as clothing) that

could inadvertently drape down
the front or back of the unit,
restricting air flow or speaker
output. Similarly, do not conceal
the 

Powered Subwoofer

 behind

draperies or other similar material.

2. The maximum low-bass output of

the 

Powered Subwoofer

 is markedly

affected by its placement with
respect to adjacent room surfaces.
Start by placing the subwoofer on

Before connecting your 

Powered

Subwoofer

, place it in your listening

room using the guidelines that
follow. Then make the connections.
Once your sound system is
operating with the 

Powered

Subwoofer

, listen and experiment

further with placement before
making the installation permanent.
1. The ear cannot localize the very

low bass sounds reproduced by
the 

Powered Subwoofer

. This is

why it is possible to use a single
powered subwoofer to reproduce
all the 25 to 40 Hz bass a sound

Placement

FIGURE 4: HOW ROOM PLACEMENT AFFECTS BASS RESPONSE

Left Satellite

Right Satellite

Powered Subwoofer

Surround

Surround

Left Satellite

Right Satellite

Powered Subwoofer

Surround

Surround

Left Satellite

Right Satellite

Powered Subwoofer

Surround

Surround

B. MORE BASS

A. LEAST BASS

C. MOST BASS

the floor against the same wall
as your front speakers, prefer-
ably close to a corner (Figure 4, B
or C). The strongest output will
be produced with the speaker on
the floor directly in the corner.
The least bass output will result
if the speaker is placed out in the
room, away from the walls (see
Figure 4, A).

3. Corner placement “confines” the

bass output to the listening
room, minimizing bass transfer
to other rooms.

4. The listening room’s construc-

tion can have a marked effect
upon the very low frequencies
reproduced by the 

Powered

Subwoofer

. Thin, relatively

flexible walls allow these fre-
quencies to dissipate readily, as
do open doors, archways open-
ing into other rooms, and even
open windows. In addition, the
larger the room, the greater the
demand for low-frequency
acoustic energy. Therefore, the
best type of room for bass repro-
duction in a home theater would
be one moderate in size, solidly
constructed, with no openings to
other rooms.

Summary of Contents for Powered Subwoofer
















Reviews: