Cambridge Audio AXR100D, Manual

Page: 20 / 29

20
DAB MODE
When selecting DAB mode for the very first time, the unit will initiate an 'Auto Scan', Repeatedly pressing the DAB/FM button on the front of the unit
switches between DAB and FM modes. This can also be done using the DAB/FM button on the remote.
Pressing the Mode/Store button will cycle through:
DAB/DAB+
Auto Scan
Preset
Service List
AUTO SCAN
Press the Mode/Store button to switch to "Auto Scan". Use the reverse ‘Skip/Scan’ or forward ‘Skip/Scan’ buttons to perform a full station scan.
A scanning percentage appears on the display while scanning for stations. When scanning is completed, AXR100D will automatically play and display the
station information if a signal is found.
PRESET
STORING RADIO PRESETS
Radio stations can be stored into the memory presets for easy access. You can store up to 40 presets for each band (i.e. 40 presets for the DAB band
plus 40 presets for the FM band).
To assign a radio station to a preset, follow the below steps, whilst listening to the frequency or station you wish to store:
Press and hold the 'Mode / Store' button. 1.