11
Getting connected
Last updated: July 29, 2022 10:31. Revision #5463
USING BARE WIRE CONNECTIONS
Prepare the speaker cords for connection by stripping off approximately 10mm (3/8”) or less of the outer insulation. More than 10mm could cause a
short circuit. Twist the wires tightly together so there are no loose ends. Unscrew the speaker terminal, insert the speaker cable, tighten the terminal
and secure the cable.
Note: All connections are made using standard loudspeaker cable.
USING BANANA PLUGS
We recommend using Banana plugs with our units to establish a secure connection and ensure there are no loose strands of wire that may cause
unwanted noise or interference.
Once you have stripped the outer insulation of the cable and twisted the wires as indicated below, securely connect these to your banana plugs, remove
the dust cap from the end of the speaker terminal and push the plug in as far as possible without applying excessive force.
Notes:
Summary of Contents for AXR100D
Page 1: ...1 AXR100D Manual Generated 31 07 2022 06 49...
Page 3: ...3 AXR100D Last updated July 29 2022 10 31 Revision 5470...
Page 15: ...15...
Page 17: ...17...
