Cambridge Audio AXR100D, Manual

Page: 14 / 29

14
The Speaker A/B button on the front panel and remote control allows the two sets of speakers to be toggled on and off. Refer to the Front Panel or
Remote Control section of this manual for more information on the Speaker A/B operation.
Either A or B, or both A and B may be selected for use.
Note: When using two pairs of speakers, use speakers with a nominal impedance of 8 ohms each.
BI-WIRE CONNECTIONS
If your loudspeakers are equipped with two sets of terminals, then it is possible to connect them in the bi-wire configuration.
Bi-wiring sends the bass and treble frequencies down separate speaker cables, resulting in a clearer, more focused sound.
Note:
– Speaker A and B must both be selected on the front panel of the unit for this type of connection to work.
– Remove the bi-wire link on the speaker terminals before connecting. Refer to your speaker’s manual for more information.