CAMBOX V4, User Manual

Page: 11 / 27

Remove your Cambox
Make sure that the velcro fastener support is in good condition and that there is no
foreign matter that could hinder the fastening of the camera. In that case, plan the
replacement of the velcro by a new original one.
Once the first wing is detached from
its velcro support, accompany the
unfastening process of the Cambox
by applying the same vertical and
circular effort.
Remove the central part and apply
the vertical and circular effort
towards the extremity of the
Cambox to end the removing
operation.
Grab the strap on the edge of the
Cambox wing and pull the strap
upward while doing a circular
movement toward the center of the
Cambox.
11
⚠