7
4.2
Levelling the base
Figure 3 Leveling the Base
To correctly level the RP1-Base you will have to use a spirit level [A]. The base features four adjustable feet
[B]. To level the base, loosen locking ring [D] then use a spanner (metric 14mm) to adjust the height of the feet
by turning nut [C]. When the base is leveled make sure to retighten locking ring [D].
4.3
Applying the column to the base
The column must be fixed to the base by using four M8x110 countersunk bolts [A] (Hexagon socket Allen key
5mm) and four M8 nuts [C] (Metric spanner 13mm). It is advised to set up the column with two persons. Place
the column on the base and insert bolts [A], place the washers and nuts on the bolts from the bottom. Do not
fully tighten the bolts and nuts before all four are placed. When all four bolts are in place, tighten the bolts and
nuts firmly using the 5mm Allen key and 13mm spanner.
Summary of Contents for RPS-SYSTEM
Page 2: ......
