8
Figure 4 Mounting the column to the base
4.4
Levelling the column
Use a spirit level [detail D]l to check if the column is leveled. Make sure the base is correctly leveled first.
Please only perform this operation when necessary. If the column is slightly off, the four set screws [D] near
the bolts [A] can be used to fine adjust the level of the column. To level the column slightly loosen bolts [A]
and screw the appropriate setscrew [D] using the 5mm Allen key. When the column is leveled, retighten bolts
[A] firmly.
Summary of Contents for RPS-SYSTEM
Page 2: ......
