10
4.6
Wall mount installation
Besides mounting the column to the base it is optional to order brackets for a wall mounted system. When
installing the wall mounted system start by applying the top bracket [A] to the wall. Make sure the distance
between the floor and the bottom mounting hole is at least 225CM. Fix the top bracket to the wall first with a
minimum of one screw on each side. Use a sprit level during mounting to make sure the bracket is fixed to the
wall leveled. Now fix the bottom bracket to the bottom of the column by using the two bolts [D] and washers
[C]. Place the bolts in the designated holes of the bottom mounting block of the column. Fix the column to the
wall mounted to bracket. Level the brackets and column by using a spirit level and fix the bottom bracket to
the wall with at least one screw on each side. For fine tuning the position of the column both the top and bottom
bracket contain a set screw [E]. Before using the set screws, slightly loosen bolts [D] then tighten or loosen
set screws [E]. when the column is leveled, retighten bolts [D].
Figure 7 RPS-System wall mount
Summary of Contents for RPS-SYSTEM
Page 2: ......
