cnPilot Enterprise AP
User Guide
CAMBIUM
NETWORKS
51
(cnPilot
Enterprise AP
) (configure)# interface vlan
vlan-id
To enable NAT for the SVI:
(cnPilot
Enterprise AP
) (configure)# ip nat inside
To disable NAT for the SVI:
(cnPilot
Enterprise AP
) (configure)# no ip nat
Port Forwarding allows to forward traffic with specific TCP / UDP ports to specific server in NAT
enabled subnet. As oppose to NAT which is SVI specific, port forwarding is a global configuration.
You can configure NAT using UI and the CLI:
In the UI
1.
Navigate to the Configure > Network > Routes tab. The following fields are displayed:
a.
Enter the port number in the Port textbox.
b.
Enter the IP address in the IP Address textbox.
c.
Select the type as TCP or UDP from the Type drop-down list.
2.
Click Save.
Figure 18: Configure: Network > Port Forwarding page
In the CLI
To forward TCP port-num to a.b.c.d server:
(cnPilot
Enterprise AP
) (configure)# ip port-forward tcp
port-num a.b.c.d
To forward UDP port-num to a.b.c.d server:
(cnPilot
Enterprise AP
) (configure)# ip port-forward udp
port-num a.b.c.d
To disable forwarding of TCP port-num to a.b.c.d server:
(cnPilot
Enterprise AP
) (configure)# no ip port-forward tcp
port-num a.b.c.d
