C3VoIP-150 Installation Manual
C3VoIP-150 Installation Manual
8. Functions
8.1
Making Calls
Dial the number directly and wait for 5 seconds (by default, it has No Key Entry Timeout).
Dial the number ending with char #. C3VOIP-150 dials out immediately
Dial the phone number which matches one dial rule. C3VOIP-150 dials out immediately and
there is no need to press # or wait for 5 seconds.
8.2
Call Waiting
Step 1.Enable waiting feature in
FXS1/FXS2→Preference→Supplementary Service→Call
Waiting
(default is Enable)
Step 2.While in conversation, user hears a special stutter tone if there is another incoming call.
Step3.User then can press
*77
(or Flash button) to put the current call party on hold automatically
and switch to the other call. Pressing
*77
toggles between two active calls.
8.3
Call Hold
Step 1.While in conversation, pressing the
*77
puts the remote end on hold.
Step 2.Pressing the
*77
again, releases the previous “Hold state” and resumes the bi-directional
media.
8.4
Call Transferring
C3VOIP-150 supports blind transfer and attended transfer.
8.4.1
Blind Transfer
Assuming that call party A and party B are in conversation, A wants to Blind Transfer B to C
Step 1.Party A dials
*98
, A hears a dialing tone
Step 2.Dial party C’s number, and press # (or wait for 5 seconds) to call C, then C rings, A is
disconnected.
Step 3.If C answer the call, B and C can go on talking.
8.4.2
Attended Transfer
Assuming that call party A and B are in conversation. A wants to Attend Transfer B to C:
Step 1.Party A dials
*77
to hold B, A hears a dialing tone
Step 2.Dial party C’s number, and press # (or wait for 5 seconds) to call C, then A hears ringing
tone.
Step 3.If C answer the call, A talks to C first
Step 4.If C wants to talk with B, A press
*98
to transfer, and then C will talk with B. If C does not
talk with C successfully, A will talk with B again.
