C3VoIP-150 Installation Manual
C3VoIP-150 Installation Manual
5
Step 1. On the phone, dial in
****
to start IVR
Step 2.Choose “5”, and C3VOIP-150 report current DNS
Step 3.Input the new DNS and with the end char #
using “*” to replace “.”, user can input 192*168*20*1 to set the new gateway
192.168.20.1
press # (pound) key to indicate that you have finished
3) Report “operation successful” if user operation properly.
If you want to quit by the wayside, press “**”.
6
Step 1. On the phone, dial in
****
to start IVR
Step 2.Choose “6”, and C3VOIP-150 report “Factory Reset”
Step 3.Prompt "Please enter password", the method of inputting password is the same as
operation 1.
If you want to quit by the wayside, press “*”.
Step 4.Prompt “Operation successful” if password is right and then C3VOIP-150 is set
to factory setting.
Step 5.Press “7” reboot to make changes effective.
7
Step 1. On the phone, dial in
****
to start IVR
Step 2.Choose “7”, and C3VOIP-150 report “Reboot”
Step 3.Prompt "Please enter password", the method of inputting password is same as
operation 1.
Step 4.C3VOIP-150 reboots if password is right and operation is properly.
8
Step 1. On the phone, dial in
****
to start IVR
Step 2.Choose “8”, and C3VOIP-150 report “WAN Port Login”
Step 3.Prompt "Please enter password", the method of inputting password is same as
operation 1.
If you want to quit by the wayside, press “*”.
Step 4.Report “operation successful” if user operation properly.
Step 5.Prompt “1enable 2disable”,choose 1 or 2, and with confirm char #.
Step 6.Report “operation successful” if user operation properly.
9
Step 1. On the phone, dial in
****
to start IVR
Step 2.Choose “9”, and C3VOIP-150 report “ WEB Access Port”
Step 3.Prompt “Please enter password”, the method of inputting password is same as
operation 1.
Step 4.Report “operation successful” if user operation properly.
Step 5.Report the current WEB Access Port
Step 6.Set the new WEB access port and with end char #
Step 7. Report “operation successful” if user operation properly.
0
Step 1. On the phone, dial in
****
to start IVR
Step 2.Choose “0”, and C3VOIP-150 report current Firmware version
