C3VoIP-150 Installation Manual
C3VoIP-150 Installation Manual
7.2.2
LAN
In this page, user can set the IP address of the device and set DHCP server. DHCP server is a kind
of network function, C3VOIP-150 can supply DHCP service for the network which is linked with
C3VOIP-150’s LAN if you enable the DHCP server for C3VOIP-150’s LAN (this is enabled by
default).
WEB Interface
Settings Introduction
1)
Local IP Address and Local Subnet Mask
Set the LAN port IP address and subnet
mask. By default the address is 192.168.1.1
and subnet mask is 255.255.255.0.
2) Local DHCP Server and DHCP Start/End
Address
If or not enable the DHCP service, and set
the start and end address of the DHCP server.
By default DHCP server is enabled.
3) DNS Mode and Primary/Secondary DNS
Set the DNS mode and address for the DHCP
server. If set to Auto, the device gets the
address from the upstream route, if set
Manual, user need enter the primary and
secondary DNS.
4) Client Lease Time
Set client lease time.
5) DNS Proxy
If or not enable DNS proxy.
User can use the default settings.
By default, the LAN port works in NAT mode, if user wants to make it work in Bridge mode,
please go to
Network-->Multi WAN
page to set.
