Cambium Networks PMP 450, Configuration And User'S Manual

Page: 63 / 196

PMP 450 Configuration and User Guide Task 2: Configuring IP and Ethernet
interfaces
pmp-0050 (May 2012)
2-31
Attribute Meaning
Active Configuration,
Current VID Member Set,
Age
For each VID number in the first column of the table, the entry
in this column reflects whether or when the VID number will
time out:
for
Permanent type—the number will never time out, and this is
indicated by the digit 0.
for
Dynamic type—the Age reflects what is configured in the
VLAN Aging Timeout parameter in the Configuration => VLAN
tab of the AP or reflects a fewer number of minutes that
represents the difference between what was configured and what
has elapsed since the VID was learned. Each minute, the Age
decreases by one until, at zero, the AP deletes the learned VID,
but can it again from packets sent by elements that are beneath
it in the network.
Values in this Active Configuration block can differ from
attempted values in configurations:
A VLAN profile administered by the BAM subsystem in
Prizm is capable of overriding any configured VLAN value,
if the
Configuration Source parameter in the AP is set to
BAM.
The AP can override the value that the SM has configured
for
SM Management VID Pass-Through .
VLAN Membership Tab of the SM
Figure 6 VLAN Membership tab of the SM