Cambium Networks PMP 450 Series, User Manual, Page: 90 / 215

Chapter 2: System hardware Cabling
Page 2-29
SFP module kits
SFP module kits allow connection of a PMP 450 Series ODU to a network over an Optical Gigabit
Ethernet interface (1000BASE-LX or 1000BASE-SX) full-duplex mode.
Note
PMP 450m supports Fiber SFPs from system release 15.0.3.
Order SFP module kits from Cambium Networks (
Table 33 ).
Table 33 SFP module kit part numbers
Cambium description Cambium part number
Single Mode Optical SFP Interface per ODU C000065L008
Multi-mode Optical SFP Interface per ODU C000065L009
To compare the capabilities of the two optical SFP modules, refer to Table 34 and Table 35 .
Table 34 Single Mode Optical SFP Interface per ODU (part number C000065L008)
Core/
cladding
(microns) Mode Bandwidth at
1310 nm
(MHz/km) Maximum
length of optical
interface Insertion loss
(dB)
62.5/125 Multi 500 550 m (1800 ft) 1.67
50/125 Multi 400 550 m (1800 ft) 0.07
50/125 Multi 500 550 m (1800 ft) 1.19
10/125 Single N/A 5000 m (16400 ft) 0.16
Table 35 Multi-mode Optical SFP Interface per ODU (part number C000065L009)
Core/
cladding
(microns) Mode Bandwidth at
850 nm (MHz/km) Maximum
length of optical
interface Insertion loss
(dB)
62.5/125 Multi 160 220 m (720 ft) 2.38
62.5/125 Multi 200 275 m (900 ft) 2.6
50/125 Multi 400 500 m (1640 ft) 3.37
50/125 Multi 500 550 m (1800 ft) 3.56
The upgrade kits contain the following components:
 Optical SFP transceiver module ( Figure 19 )