Troubleshooting cnWave™ 5G Fixed Platform of Products
25
Figure 13:
The BTS Radio parameters
l
Authentication - When you navigate to the System > Authentication page from the main
B1000 dashboard page, the Mode parameter is visible. To test a BTS-CPE link for the first
time or to troubleshoot an existing link, it is recommended to disable the Radius
authentication by choosing the None option (as shown in
Figure 14
).
Figure 14:
The Authentication Mode parameter
l
Synchronisation - When you navigate to the System > Synchronisation page from the main
B1000 dashboard page, the TDD Configuration section is visible with the following
parameters (as shown in
Figure 15
):
l
Control
l
Source
For the initial test, set the Control parameter to Disabled and use the Internal GNSS option
as the source (these must be the default parameters) in the TDD Configuration section.
