cam ZPH Series, Operating Manual

Page: 19 / 40

19/40
6.2. Operating instructions
Please see chapter 7 for the daily maintenance schedule.
• The lifting device with attachment installed needs to be approved for use prior to
commissioning.
• Be sure to obtain the manufacturer’s certification concerning the residual capacity of the lift
lifting device, after installing the attachment.
6.2.1. Load lifting
Perform the daily maintenance check before each use as described in chapter
7.3. ‘Maintenance instructions’
1. Before starting
First, use the hydraulic levers to check which levers operate which function.
Use all the functions several times with no load to check if they function normally and smoothly.
Before lifting a load, operate the forks several times to remove air from the circuit.
Before lifting a load, position the fork.
Don’t adjust the fork with a load!
2. Loading
1. The load must be positioned against the body of the forks and not towards the tips of the lifting
forks.
Make sure that the load cannot move or fall. This can cause accidents.
2. The forks must be spaced inside the pallets.
After lifting the load, always position the forks in the centre.
Correct pick-up Incorrect pick-up
Correct pick-up
Forks
Incorrect pick-up
Forks