10.
General
Changes to the module components serve to continually improve the products. These include
changes made through component improvements, change of suppliers or small design changes
initiated by Calyxo. All products with the same classification have equal functionality and are fully
compatible with one another, even when small differences may occur. Changes that do not
influence the functionality of the product are usually made without informing customers. Before
components or design changes are introduced into the manufacturing process, they are submitted
to internal testing, inspections or repeated reviews. These are also conducted by a certification body.
Calyxo reserves the right to make changes to the solar module design and/or specifications at any
time without prior notice. The customer will be accordingly notified to check that the data sheets
are current before contracts are made or system designs are finalised. Calyxo ensures that data
sheet and additional information is always accessible and corresponds to the latest status.
However, Calyxo assumes no responsibility for its use, or for injuries to patents or
the rights of third parties that may result from use. No licence – either implicit or explicit – is guaranteed
under a patent or patent rights from Calyxo.
In the event of a discrepancy between this operating manual and other instructions from other system
component manufacturers, the system component instructions should be followed.
Further information regarding Calyxo and our products is available at www.calyxo.com. If
you have any support questions, please contact [email protected].
ADDRESS
Calyxo GmbH
Sonnenallee 1a
06766 Bitterfeld-Wolfen
Germany
This do
cument is applicable to the following starting in February 2017: The CdTe thin film solar modules in the CX3/CX3
pro
product series. This document replaces all prior revisions to the operating manuals for this module range.
Changes to the technical parameters and design are reserved. The current data sheets and customer information available at the
time of manufacture of the affected module apply when carrying out installation, assembly or maintenance work to the modules.