background image

CS3000 User’s Guide 

Calsense  

75 

Communication 

Subscription Services and Renewal 

Calsense offers 1-year and 5-year prepaid cellular data access service plans for use with the 4G LTE 

(model CS3-GR-KIT) communication option. These prepaid plans allow the use of cellular service without 

the need to sign a contract with a third-party service provider. Any changes to the service are handled 

by Calsense, as are any firmware updates and programming changes that may need to be done to the 

radio during the term of the plan.  

The Calsense Data Access Service is offered in several varieties, based on a site’s individual needs: 

 

COMM-1YR-2 provides one or two controllers with 12-consecutive months, or one year, of data 

communication service 

 

COMM-1YR-4 provides three or four controllers with 12-consecutive months, or one year, of 

data communication service. This is commonly used with small 

FLOWSENSE

® chains. 

 

COMM-1YR-35 provides up to 35 controllers with 12-consecutive months, or one year, of data 

communication service. This is commonly used with larger 

FLOWSENSE

 chains or 

communication hubs. 

 

COMM-1YR-36+ provides an unlimited number of controllers with 12-consecutive months, or 

one year, of data communication service. This is intended for very large communication hubs. 

Each of these plans are also available with 60-consecutive months, or five years, of data communication 

service. For example, the 5-year one to two controller plan is specified as COMM-5YR-2. 

Communication Options 

The Communication Options menu varies based on the options installed on the controller (Figure 67). 

Besides the ability to test communications, it also includes the ability to program communication 

devices physically attached to the controller. Device programming is beyond the scope of this User’s 

Guide, but Calsense’s Customer Service team is available at (800) 572-8608 to help. 

 

Figure 67: Communication Options Screen 

Summary of Contents for CS3000






















































































Reviews: