Calrec SUMMA, Installation Manual

Page: 70 / 96

70 SUMMA
Networked Audio Production System
Remote Control and Production Automation
Configuration
Please discuss your installation
requirements with your Calrec sales
representative or distributor prior to
delivery. CSCP connections should be
configured and tested by, or under the
guidance of a Calrec approved engineer.
The following points should be noted
when communicating your requirements:
The default Calrec IP addresses are xxx.
yyy.1.0 for the primary, and xxx.yyy.2.0
for the secondary Control Processor
cards. xxx.yyy is unique for each Summa/
standalone router processing core and
can be confirmed by running the Program
Updater GUI on the support laptop. If the
default addresses are not suitable, please
supply alternative IP addresses and a
subnet mask which can be configured
pre-delivery or during commissioning.
If required, the Calrec system can be
configured to connect via an IP gateway.
In addition to connecting by IP address,
both the Calrec system and the 3rd party
require configuring to use the same TCP
socket port. The default TCP socket port
for CSCP is 49200.
User&bootupenable/disable
Once configured, CSCP can be enabled
or disabled from the touch screen
interface. CSCP settings are not saved
as part of the show or user memory and
will therefore not change when different
shows/memories are loaded onto the
control surface.