background image

PLEASE ADHERE TO INSTRUCTIONS IN THIS MANUAL

Failure to do so may be dangerous and may void certain provisions 
of your warranty.

For further assistance, please call 24hr hotline: 1-877-325-3473 (U.S.A. and Canada)
Please have model and serial numbers available before calling.

Oakville

1-800-410-3131
1-905-829-4422
F 905-829-4430

Orillia

1-877-325-3473
1-705-325-3473
F 705-325-2106

WARRANTY

:

 

Under normal use the Company warrants to 

the purchaser that defects in material or workmanship will be 
repaired or replaced without charge for a period of 18 months 
from date of shipment, or 12 months from the start date of 
operation, whichever expires first. Any claim for warranty must 
be reported to the sales office where the product was purchased 
for authorized repair or replacement within the terms of this 
warranty. 

Subject to State or Provincial law to the contrary, the Company 
will not be responsible for any expense for installation, removal 
from service, transportation, or damages of any type whatsoever, 
including damages arising from lack of use, business interruptions, 
or incidental or consequential damages.

The Company cannot anticipate or control the conditions of 
product usage and therefore accepts no responsibility for 
the safe application and suitability of its products when used 
alone or in combination with other products. Tests for the 
safe application and suitability of the products are the sole 
responsibility of the user.

This warranty will be void if, in the judgment of the Company, 
the damage, failure or defect is the result of:

• 

Vibration, radiation, erosion, corrosion, process 
contamination, abnormal process conditions, temperature 
and pressures, unusual surges or pulsation, fouling, 
ordinary wear and tear, lack of maintenance, incorrectly 
applied utilities such as voltage, air, gas, water, and others 
or any combination of the aforementioned causes not 
specifically allowed for in the design conditions or,  

• 

Any act or omission by the Purchaser, its agents, servants 
or independent contractors which for greater certainty, but 
not so as to limit the generality of the foregoing, includes 
physical, chemical or mechanical abuse, accident, 
improper installation of the product, improper storage 
and handling of the product, improper application or the 
misalignment of parts.

No warranty applies to paint finishes except for manufacturing 
defects apparent within 30 days from the date of installation.

The Company neither assumes nor authorizes any person to assume for it 
any other obligation or liability in connection with the product(s).

The Purchaser agrees that all warranty work required after the initial 
commissioning of the product will be provided only if the Company 
has been paid by the Purchaser in full accordance with the terms and 
conditions of the contract.

The Purchaser agrees that the Company makes no warranty or 
guarantee, express, implied or statutory, (including any warranty of 
merchantability or warranty of fitness for a particular purpose) written 
or oral, of the Article or incidental labour, except as is expressed or 
contained in the agreement herein.

LIABILITY:

 

Technical data contained in the catalog or on the 

website is subject to change without notice. The Company reserves 
the right to make dimensional and other design changes as required. 
The Purchaser acknowledges the Company shall not be obligated 
to modify those articles manufactured before the formulation of the 
changes in design or improvements of the products by the Company.

The Company shall not be liable to compensate or indemnify the 
Purchaser, end user or any other party against any actions, claims, 
liabilities, injury, loss, loss of use, loss of business, damages, indirect 
or consequential damages, demands, penalties, fines, expenses 
(including legal expenses), costs, obligations and causes of action of 
any kind arising wholly or partly from negligence or omission of the 
user or the misuse, incorrect application, unsafe application, incorrect 
storage and handling, incorrect installation, lack of maintenance, 
improper maintenance or improper operation of products furnished 
by the Company.

Edmonton (Head Office)

1-780-466-3178
F 780-468-5904
5918 Roper Road
Alberta, Canada T6B 3E1

Houston

1-855-219-2101
1-281-506-2310
F 281-506-2316

Denver

1-855-244-3128
1-303-979-7339
F 303-979-7350

Summary of Contents for BX2011S









Reviews: