BA-ORTHO_EN V2.0
Seite: 12 von 19
6.4 Operation
Keyboard and Display
1. For smooth speed adjustment
2. Off - button
3. Distance indication
4. Time indication
5. Pulse rate adjustment
6. Inclination adjustment (if available)
7. Available for programming
On the Terminal are keys, which can be controlled by smart pushing and without force.
Normal-Mode:
U
se “PLUS”-button to increase the speed
Use “MINUS”-button to decrease the speed
Use “ARROW UP”-button to increase the inclination
Use “ARROW DOWN”-button to decrease the inclination
USE “OFF”-button to switch off the treadmill immediately
With the „STOP-Button“ you can set the speed to 00.0km/h. Bei reaching the count the display starts
blinking.
With the „Plus-Button“ you can stop reducing the speed and the blinking will stop, eather you can
adjust the speed.
The „SET1-Button“ resets the Display for the distanz up to 000.0km.
The „SET2-Button“ resets the Display for the time up to 00:00 min:sec.
Bothe Displays starts counting if the treadmill is working and stops if the mill is not moving. All the time the
show you the actual count.
