1. Self test when power on
When the receiver display is power on, it starts initialization program. The screen shows the digits
from 000 to 999 along with the prompt sound “Initialization... please wait”.
2. Function settings
At first time use, please do the settings as below. After all the settings are finished, please power off
the host and reboot it.
Press [SET] button to enter the first class settings menu. Then press “UP/DOWN” button to select
the menu from “--1" to “-12". And press [SET] button to enter submenu.
(1) --1
:
Pairing call buttons
Before do the pairing, please
turn
to
"
--6
"
to
set
key
switch setting
and
"-10" to set the working
mode
,
for example,
999 number
mode
or
99b function
mode
.
Press [SET] button to enter "--1" submenu. The display will show "001", then press [UP/DOWN] to
select the call button number.
1) 999 mode paring method
Press [UP/DOWN] button to select one number from 001 to 999, for example “001”, and then press
any button on the call button, the speaker will sound “successful registration” and the display screen
turn to next number “002” automatically. Then you can continue to do pairing of other call buttons.
2) Area mode paring method
In area mode, the first digit of three is the area, it can show
"
A/b/C/d/E/F
"
areas, the last two digits
means the number from 01 to 99 in one area, press [UP/DOWN] button to select suitable area and
number.
3) 99 mode paring method
Press [UP/DOWN] button to select one number from 1 to 99, for example “001”, and then press any
button on the call button, the speaker will sound “successful registration” and the display screen turn to
next number “002” automatically. Then you can continue to do pairing of other call buttons.
4)
keypad paring method
In key switch setting, select “005”, it is special for keypad call button mode.
The turn back to “--1” pairing setting, the display shows “001”, then press any button on the keypad
, the receiver will get it and prompt “pairing successful, please continue.”
and
the
display
will
turn
to
"
002
".
That means all the 999 numbers are paired.
Note: the receiver can pair 3 keypad in maximum.
(2) --2: Pair management controller
Press [SET] button to enter "--2" submenu. The display will show "001", then press the
button
on
management
controller
,
the
receiver
will
get
it
and
prompt
"
pairing
successful
,
please
continue
."
and
the
display
will
turn
to
"
002
".
That
means
the
pairing
is
finished
.
After
paired
the
management
controller
,
use the controller
button
[SET/BACK/UP/DOWN]
to
replace
the
receiver
settings
button
.
Note
:
the
receiver
can
pair
3
manager
controller
in
maximum
.
If
you
pair
the
fourth
one
,
it
will
cover
the
last
one
.
(3) --3: Delete
management
controller
Press [SET] button to enter "--3" submenu. The display will show "001", press
[
UP
/
DOWN
]
button
to
select
which
controller
will
be
deleted
,
then
press
[
DEL
]
button
to
delete
.
The
receiver
will
prompt
"
Dingdong
"
voice
which
means
the
deleting
is
finished
.
Operation
--
5
--