--
7
--
Notice
1. While it is working, please pull the antenna out for the best receiving effect.
2. Hold on [DEL] button for 5s for deleting the call buttons, please do the settings carefully.
3. While it connects to the alarm, when there is alarm signal, it sounds for 10s.
FAQ
Problems
Reasons
Solutions
While power on, the receiver host
has no response.
The power adaptor is broken.
Change the power adaptor.
The signal of some transmitters is
not enough.
The power of battery is low.
Change the battery.
Receiver host cannot get some
transmitters of them.
These transmitters are deleted.
Pair these transmitters again to
the receiver host.
No voice prompt while power on
or calling.
The volume is lowest.
Adjust the volume louder.
Packing List
button to restore all the settings and pairing information:
A) All the paired call buttons are deleted.
B) All the paired manager controller are deleted.
C) Prompt voice is “001" mode.
D) Key switch mode is “004” mode.
E) Cycle display time is “000”.
F) Auto clear time is “000”.
G) Volume is 15.
H) Working mode is 999 mode.
(12)-12:Display sequence setting
"000" is descend order, the 1st display is the latest calling number;
"001" is ascend order, the 1st display is the oldest calling number.
Name
Quantity
Receiver host
Power adaptor
User manual
Warranty card
1 pc
1 pc
1 pc
1 pc
Name
Quantity
Fixed hook
2 pcs
2 pcs
Screws
