76
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Create an action to add a tag (VLAN 400)
to all traffic based on the P-bit for the
associated interface.
Create an action to add a tag (VLAN 400)
to all traffic based on the P-bit and outer
tag on the associated interface.
Example application configuration for tag-action versus VLAN membership:
For incoming traffic where the voice and video services are single-tagged and the per-port-
data VLANs are double-tagged:
VLAN-per-port for data traffic
Single voice service VLAN
Single video service VLAN
Configure the following:
1.
Create a voice VLAN and a video VLAN and add the interface to each of the VLAN
memberships.
2.
Create a no-match add-tag action to the interface for all remaining VLANs to add an
outer data service tag.
Before starting
Before starting the VLAN tag action process, check that the following conditions are met:
The VLANs must already exist in order to create tag actions.
The interface that is the target for the tag action must have the edge or access role
assigned.
Parameters
You can provision the following parameters for VLAN tag actions to an Ethernet interface:
