Calix E3-48C Application Manual Download Page 118

Page: 118 / 225

118

Proprietary Information: Not for use or disclosure except by written agreement with Calix.

Parameters

You can provision the following parameters for multicast white lists and ranges:

Parameter

Description

Valid Options

Name*

Name of the multicast white list.

32 character string

ID*

Index value designating the multicast range in the
multicast white list map. You can leave the value, or
select another (1-32).

1-32

Start IP Address*

First address in the multicast range.

Any multicast address, lower than the end
IP address (224.0.0.0 - 239.255.255.255)

End IP Address*

Last address in the multicast range.

May be 0 (for single address), if non-0 must be in Mcast
range and greater than start IP address value.

Any multicast address, higher than the end
IP address (>239.255.255.255)

*Required fields

To create a multicast white list and address ranges

Access the profile page:



From CMS:



On the Navigation Tree, click

CMS



In the Work Area, click

Profile

E3-48C/E5-48/E7/ONT >

Profile

Service

Multicast White List



Locally on the E-Series:



On the Navigation Tree, click the unit.



In the Work Area, click

Profiles

Service

Multicast White List

In the menu, click

Create

to open the Create Multicast White List dialog box.

In the Name box, enter a descriptive name for the list, and then click

Create

In the list of existing multicast white lists, double-click the name to select it.

In the menu, click

Create

to open the Create Multicast White List Range dialog box.

Reference the table above to configure the parameters.

Click

Create

to add the multicast address range to the multicast white list.

Repeat Steps 5 through 7 to include another multicast range in the multicast white list.

Associate the multicast white list when creating a video service.
See Configuring IP video Services for instructions.

Summary of Contents for E3-48C
































































































































































































































Search results

Summary of Contents for E3-48C

Reviews:

Related manuals for E3-48C

Brands by name

Popular brands

Calix E3-48C, Application Manual

Search results

Summary of Contents for E3-48C

Reviews:

Related manuals for E3-48C

Brands by name

Popular brands