Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: 049 (0)8341 9764-0 Fax: 049 (0)8341 67806
31
When using this device in caravans, the device and the battery must be
installed with physical separation between them and in well-ventilated
boxes!
The assembly and connection of electric devices should always be carried
out by qualified personnel!
Always make sure that the power supply is disconnected!
Pull out the mains plug!
When connecting the device, use only the supplied parts and the specified
cable cross-sections and fuses!
Only use suitable and undamaged tools.
Only connect the device according to the supplied connection diagram!
Setting up
Remove the items packed separately (accessories) from the main carton, and
check them for completeness.
4
Fastening screws with washers
1
Operating instructions
Option
(not included)
Quick connector for battery "Quick power", part no. H10 432 0110 00
Temperature sensor for battery II part no. H10 012 0003 00
The device should be set up in a location not exposed to humidity and damp.
The setting up location must be clean, dry and well-ventilated. During
operation, the housing may heat up to approx. 75 °C. Therefore maintain a
minimum clear distance of 100 mm and make sure that the ventilation slots are
not covered.
Important
Make sure that the ventilation slots remain unobstructed! The minimum clear
distance must be 100 mm! Insufficient ventilation can cause overheating of the
device! The device is designed for operation in ambient temperatures of up to
35 °C. If the temperature inside the device rises due to a lack of air circulation
or due to high ambient temperature, the charging current is automatically
reduced in steps.
