califone.com
califone.com
8
Use the level to draw a level line connecting the marks just made on the wall.
Pre-cut strips of (0.5”) double-sided mounting tape into the following lengths:
(16) - 12.75” lengths
(2) - 6.25” lengths
(4) - 1” lengths
9
Apply all pre-cut strips of (0.5”) double-sided mounting tape to Sensors
Remove backing from double-sided tape from the (1) USB corner sensor piece (labeled
“R-B”) and mount to the bottom right hand corner to begin the build onto the level
line created in Step 3.
IMPORTANT
: During installation of all modules and corner pieces, be careful to avoid
bending any of the pins. Also, ensure that the modules are properly connected to each
other by ensuring there are no gaps and the tops/sides of the modules are flat and
aligned with each other.
