CONTINUED
STEP 5:
Next insert 6” Hinge Pin into provided end cap.
Do not put both end caps on
. Insert hinge pin
through shield fingers and hole in mounting bracket. Next lift the shield in place horizontally to
locate the 2
nd
6” pin bracket location on the outside edge. Follow the same 1-1/2” distance down for
both holes. The distance across should be determined so the bracket fits in between the fingers. The
3
rd
bracket again is positioned with the same down dimensions but should be placed closer to the
outside of the trailer preferably in between the large gap. After the 3
rd
bracket and hinge pin are
assembled move shield up and down and back and forth for any fine-tune adjustments. Repeat
STEP 5
for brackets 4 through 6. After final adjustments are made, grip pins with pliers and tap on
other end caps. A C-Clamp can be also be used to hold pin in place while attaching last pin caps.
CALIBER
®
952-985-9999
CI5009
3
1
st
Bracket Placement
8” Across from Nose
1-1/2”
1-1/2”
