Radio Operations
07 12
:
VOL 25
RADIO
1 0 7 . 1 5
FM1
STEREO
LOC
M H Z
2
Frequency
Radio band
Stereo/mono Local/distant
Preset station
number
Volume
Clock
Last position memory feature
- During disc, USB, SD/MMC card
playback, press and hold the
button to turn off the unit, when you next
switch on it, the unit will resume playing
from the point that it was interrupted.
POWER
-During disc, USB, SD/MMC card
playback, press the
button to
switch to a different mode, when you next
return to the previous disc, USB,
SD/MMC card playback mode again, the
unit will resume playing from the point
that it was interrupted.
MODE
To select the radio mode
Press the
button to select the
radio mode. You will see the following
radio screen on the
one of the three
MODE
TFT screen.
In radio mode, Press the
button
repeatedly to select
radio broadcasting bands: ->FM 1-> FM 2
-> FM 3 ->.
Press the
or
button, the automatic
search will start. It will search upward or
downward for the strong signal radio
station within the current band.
To select a radio band
Auto/ Manual tuning
BAND
- Automatic search mode:
Press and hold the
or
button until
“MANU” appears on the TFT screen, it
will change into manual searching mode.
Press the
or
button repeatedly to
manually search upward or downward
step by step for the desired radio station
within the current band. For fast manual
searching, press and hold the
or
button.
In manual search process, if the both
buttons haven’t been pressed within 5
seconds, it will change into automatic
search mode automatically. “MANU”
disappears on the TFT screen.
FM station is received in stereo mode.
However, if the signal weak or reception
is not as good as you would like,
switching to MONO mode usually
improves the overall sound quality
- Manual search mode:
Stereo/Mono
Local/Distant
Press and hold the
button on the
head unit or briefly press
on the
remote control to choose FM STEREO or
MONO audio effect.
In urban settings, most stations are
strong enough and it should be set in
LOCAL mode.
Switch to DX (distant) mode to search for
stations with weaker signals.
Press and hold the
button on
the head unit or briefly press the LO/DX
button on the remote control to choose
local reception or DX(distant) reception
mode.
You can store up to a total of 18 radio
stations in the memory (18 FM), manually
or automatically.
- Select a band (if needed)
- Select a station by
or
button,
refer to auto / manual tuning.
- Hold a Pre-set button (
-
) for at
least 2 seconds.
- Select a band (if needed).
- Press a preset button (
-
) briefly
to recall the stored station.
TA/ST
MO/ST
PTY/LOC
- To store a station:
M1 M6
- To recall a station:
M1 M6
To store / recall a preset radio stations