Leave this manual for the user.
CAUTION:
If the electronic mixing valve is not installed, commissioned and
maintained properly, according to the instructions contained in this manual, it
may not operate correctly and may endanger the user.
CAUTION:
Make sure that all the connecting pipework is water tight.
CAUTION:
When making the water connections, make sure that the pipework
connecting the LEGIOMIX electronic mixing valve is not mechanically overstressed.
Over time this could cause breakages, with consequent water losses which, in turn,
could cause harm to property and/or people.
CAUTION:
Water temperatures higher than 100ºF (38ºC) can be
dangerous. During the installation, commissioning and maintenance
of the LEGIOMIX electronic mixing valve, take the necessary
precautions to ensure that such temperatures do not endanger people.
CAUTION:
To prevent any damage which will cause the electronic mixing
valve to not operate correctly, treat highly aggressive water before entering
the electronic mixing valve. Be sure water hardness is less than 10 grains.
SAFETY INSTRUCTION
CAUTION:
All work must be preformed by qualified personnel trained in the
proper application, installation, and maintenance of systems in accordance
with all applicable codes and ordinances.
This safety alert symbol will be used in this manual to draw attention to safety related
instructions. When used, the safety symbol means
ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT
IN A SAFETY HAZARD.
CAUTION:
IMPORTANT: Risk of electric shock. The back panel and mixing valve
contain live circuits. Cut off the electric supply before performing work. Failure to follow
these instructions may result in injury of persons or damage to property.
CAUTION:
When turning on confirm the desired language. English is the
default language. But, if not selected after 1 minute, the menu will go directly to
the date and time choice. Language can then be selected always in “settings”.
2
CAUTION:
Safety measures must be in place before engaging disinfection
mode. Anti-scald protection devices, certified to ASSE 1016 or ASSE 1070,
at all downstream fixtures, must be installed.
