background image

Dimensions

6

Replacement parts

Replacement check valve and strainers for 

521201A under sink thermostatic mixing 

valves.

F0001270.........check valve and two 

strainers, one set for the cold inlet port 

and one  set for the hot inlet port.

D E S C R I P T I O N

C O D E

documento gestito da sistema informatico: se distribuito esternamente, l'aggiornamento e la validità dello stesso devono essere verificati ad ogni utilizzo. Sono vietate le modifiche manuali.

Attention, document managed by software system: in case of external distribution, its update and validity must be checked at any need. Hand changes are forbidden.

Questo documento non è da ritenersi impegnativo. Ci riserviamo il diritto di modificare i nostri prodotti, di apportare miglioramenti tecnici e di svilupparli ulteriormente. Attenzione,

This document can not be considered binding. We reserve the right to change our products, to produce technical improvements and to further develop them.

1

2

3

4

A

B

C

D

E

F

F

E

D

C

B

A

1

2

3

4

A4

1 3/8”

3 1/2”

3/8” compression*

3/8” compression*

3/8” compression*

3/8” compression*

1 1/16”

3 3/16”

 

MIX SOTTOLAVABO 30-50°C(90-120°F)

521201A

Code 521201A

                       0.5 lb /0.3 

*Actual thread is 9/16” - 24 UNEF.

5-pack of plugs/nuts to plug the valve cold 

outlet port when using 521201A with a 

single-pipe fixture.

NA10741.................................plug/nut

                    3/8” compression (5-pack)

Summary of Contents for 521201AP













Reviews: