Operating Instructions
Calderprep Plus Rotary Scraping Tool 20-63mm
06
04. Operation
9. Begin to turn the whole tool clockwise using the crank handle. As the
tool is turned it will automatically advance the scrape down the pipe.
10. It may be necessary to pause scraping to remove excess peel.
Removal
1. Whe
n the scrape is complete push down once again on the rear of
the arm and put the arm spring clip in place to keep the arm raised
away from the pipe.
2. Remove the mandrel head from the pipe If there is difficulty
removing it, turn (the mandrel only), anticlockwise to remove.
Storage
IMPORTANT! When not in use always:
1. Ensu
re the tool is clean and dry before storage.
2. Always store in the tool case provided.
Routine Maintenance
1. Check for correct movement and operation and lubricate moving
parts at re
gular intervals before using.
2. It is important to ensure all component parts are present and in
serviceable condition.
