Page 13
IMPORTANT:
The following must be followed to properly install the equipment compartment door.
Place top of door or panel directly below bartop against the frame of the spa. For Utopia spas, first lift the
•
fiber optic cable out of the way.
Push bottom of door or panel against the spa frame.
•
Slide door or panel upward (pushing in on center of door to ensure door clips catch) until screw holes line
•
up, making sure that the exterior fiber optic light cable will fit into the fixture.
Slightly pull on door or panel. If door remains against the spa, then replace the screws.
•
If the door does not lock into position, repeat the previous steps.
•
Power
jumpers
Geneva
™
, taHitian
®
, niaGara
®
, elation
®
wirinG diaGramS
cantaBria
™
