background image

250

A

(250IO)  SPA (JET + HARD WATER)  ENGLISH  7.5” X 10.3”  PANTONE 295U  12/12/2014

English

OWNER’S MANUAL

PureSpa™ 

SPJ-H-20-1

IMPORTANT 

SAFETY RULES

Read, understand, and follow 

all instructions carefully before 

installing and using this product.

250-*A*-R1-1512

Do not forget to try these other fi ne Intex products: pools, pool 
accessories, in-home toys, airbeds and boats available at fi ne 
retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves 
the right to change specifi cations and appearance, which may 
result in updates to the instruction manual without notice.

For illustrative purposes only. 

©2014 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte 
vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/
Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in 
Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex 

Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

 • Distributed in the European Union by/Distribué dans l’Union Européenne 

par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR 

Roosendaal – The Netherlands
www.intexcorp.com

Summary of Contents for PureSpa SPJ-H-20-1






















Reviews: