Intex PureSpa SPJ-H-20-1C Owner'S Manual Download | Manualshive

Page: 1 / 21

background image

297

A

(297IO) SPA (JET + HARD WATER) ENGLISH 7.5” X 10.3” PANTONE 295U 07/26/2016

English

OWNER’S MANUAL

PureSpa™

SPJ-H-20-1C

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for

future reference.

297-*A*-R0-1707

Do not forget to try these other fi ne Intex products: pools, pool
accessories, in-home toys, airbeds and boats available at fi ne
retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves
the right to change specifi cations and appearance, which may
result in updates to the instruction manual without notice.

For illustrative purposes only.

©2016 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte
vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/
Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in
Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex

Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

• Distributed in the European Union by/Distribué dans l’Union Européenne

par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR

Roosendaal – The Netherlands
www.intexcorp.com

1
2
3
...
»

Summary of Contents for PureSpa SPJ-H-20-1C






















Reviews:

No comments

Related manuals for PureSpa SPJ-H-20-1C

Brand: EAGO Pages: 9

PureSpa SJB-HS-11

Brand: Intex Pages: 26

PureSpa SJB-HS-10-1

Brand: Intex Pages: 28

Brand: Jacuzzi Pages: 84

Brand: LAZBOY Pages: 47

Brand: Jacuzzi Pages: 68

Brand: BETTE Pages: 8

KOS Quadrat Relax

Brand: ZUCCHETTI Pages: 104

Brand: RotoSpa Pages: 8

Brand: RotoSpa Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands