Intex PureSpa Greywood Deluxe SB-HWF10 User Manual Download

Page: 1 / 30

352

(352PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 12/16/2021

English

OWNER’S MANUAL

PureSpa™

Greywood Deluxe™

SB-HWF10

Do not forget to try these other ﬁ ne Intex products: pools, pool

accessories, in-home toys, airbeds and boats available at ﬁ ne

retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves

the right to change speciﬁ cations and appearance, which may

result in updates to the instruction manual without notice.

For illustrative purposes only.

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for

future reference.

IMPORTANT!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, Visit

www.intexcorp.com

For technical assistance, missing parts or warranty claims call (for U.S. and Canadian Residents):

1-310-549-8235

Monday through Friday, 8:30am to 5:00pm Pacifi c Time

352-*PO-R0-2212

Summary of Contents for PureSpa Greywood Deluxe SB-HWF10































Search results

Summary of Contents for PureSpa Greywood Deluxe SB-HWF10

Reviews:

Related manuals for PureSpa Greywood Deluxe SB-HWF10

Brands by name

Popular brands

Intex PureSpa Greywood Deluxe SB-HWF10, Owner'S Manual

Search results

Summary of Contents for PureSpa Greywood Deluxe SB-HWF10

Reviews:

Related manuals for PureSpa Greywood Deluxe SB-HWF10

Brands by name

Popular brands