352
PO
S AVE THESE INSTRUCTIONS
(352PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 12/16/2021
English
Page 15
OPERATION (continued)
SPA CONTROL PANEL
L: Celsius/Fahrenheit Toggle and WiFi Pairing Button
M
：
WiFi LED Indicator
M
L
Celsius/Fahrenheit Toggle Button:
The temperature can be displayed in either Fahrenheit or
Celsius. The system’s default is Celsius.
NOTE:
The default temperature is 68°F (20°C). Temperature adjustment ranges from 50°F (10°C)
to 104°F (40°C).
WiFi Pairing Button:
Touch this button for 5 seconds to begin spa WiFi pairing with your mobile
device.
WiFi LED Indicator Status:
•
ON/Solid
: The product is paired up and connected to the home WiFi signal successfully.
•
Flashing slowly
: Pairing mode stage. If it’s not paired up and not connected to the home
WiFi signal within 2 minutes, the WiFi LED indicator will turn off . Touch the pairing button
for about 5 seconds to repeat the pairing process.
•
Flashing rapidly
: WiFi router/internet network problem. Please check “Troubleshooting” for
more details.
•
OFF/Blank:
Spa control panel pairing failure or nerver connected to the home Wifi signal.
Keep touching the pairing button
for about 10 seconds to repeat the pairing process. If
the problem still persists, check “Troubleshooting” for more details.
Intex
®
Spa Management App Setup User Guide
The WiFi App Control allows you to turn on/off any function on your spa, and program a schedule for future
use remotely even when not at home from your mobile device.
System and WiFi Router Requirement
The Spa control base hardware communicates over a 2.4GHz network supporting
802.11b/g/n wireless technology. The hardware
does not support 5GHz networks
. It is
recommended that you turn off your 5GHz network during the Spa Management App setup
and pairing process.
WiFi Pairing
For a successful fi rst time WiFi pairing between the spa wireless control panel and your mobile device,
make sure:
•
To keep the wireless control panel on the spa control base charging dock.
•
The area where the spa will be installed is within your WiFi router coverage range. The area shall be
free from metallic walls/mesh and other objects that may interfere with or reduce the WiFi signal.
•
Turn off the mobile data (2G, 3G, 4G and LTE) function on your mobile device fi rst, and make sure
your mobile device is connected to your WiFi router before pairing the device with the spa control
panel. Check the WiFi signal strength is full by browsing the internet with your mobile device using the
connected WiFi network and ensure the webpage loading speed is fast.
WiFi APP
QR Code
NOTE:
Keep the spa control panel within 5m (16ft) range of the control base to ensure good
wireless transmission signal.
The spa control panel is resistant to water, but it is not designed to be completely submerged. Do
not put the control panel in the water. Submersion could cause water to enter the panel causing
damage to the electronics.
