lOCk OvERRIdE
The Lock Override feature is for spa users who normally keep the set temperature locked. Should the user wish to lock all spa controls temporarily, the spa lock can be
applied over an already-applied temperature lock. Then, when the spa lock is removed, the temperature lock will remain on to prevent unwanted tampering with the set
temperature.
lIghT - MUlTI-COlOR MENU CONTROlS
(PalaTINO
,
MarINO
,
VaNTO
&
TarINO
Spa Models only
)
Your spa lights can display a variety of different colors as well as run through a continuous sequence of colors (loop) at different speeds. To activate this function the
following is required:
Press the SET button to scroll to the TOOLS menu. Once displayed, press the TEMP
button to enter the TOOLS menu. Press the SET button to scroll to LIGHT menu,
press the TEMP
button to enter DIM, screen. Press the TEMP
button or TEMP
button in the DIM screen to adjust the brightness of the lights. Press the SET
button to scroll to Color sceen. Press the TEMP
button or TEMP
button in the COLOR screen as many times as desired to toggle through the different light colors.
Press the SET button to scroll to Loop sceen. Press the TEMP
button or TEMP
button in the LOOP screen to select a continuous sequence of colors, the higher the
loop number the faster the color sequence will run. Press the SET button to scroll to EXIT sceen. Press the TEMP
button in the EXIT screen to exit the LIGHT menu.
If the light is turned off while in the LOOP or COLOR mode, the same mode will exist when the light is reactivated. You will see a flashing light icon whenever the LOOP
mode and lights are turned on.
SlEEP MOdE
The Sleep Mode operation is a feature that minimizes pump operation during quiet evening hours. For example, if Filter Cycle 1 (F1) is set to activate at
8:00 a.m., by default, Filter Cycle 2 (F2) will activate at 8:00 p.m. (12 hours later). During 8:00 p.m. to 8:00 a.m., if the spa should call for heat, the pump
and heater will activate to heat the spa under normal temperature demand. However, when in Sleep Mode, should the spa call for heat, the pump and
heater will be suspended after Filter Cycle 2 (F2) until the activation of Filter Cycle 1 (F1), at 8:00 a.m. to minimize pump activation during quiet evening
hours.
Important:
Power-up of the spa starts the F1 sequence. In order for the sleep mode to work in the evening hours, the spa must be powered up in the early morning
hours. The Sleep Mode will always be active the 6-12 hours between the end of (F2) and the begining of (F1) depending on how the filter cycle program is set.
Note:
If temperature drops below 80º F (27º C), heater will automatically activate to prevent spa from freezing.
To activate Sleep Mode feature:
A. Press the SET button until the TOOLS menu is illuminated.
B. Press the TEMP
button to enter the TOOLS submenus.
C. Press the SET button until ECON is illuminated on the display.
D. Press the TEMP
button to activate Sleep Mode. The Moon & Stars icon will apear in the display of the control panel, indicating this feature has been activated.
To deactivate this feature, simply repeat steps A-C then press the TEMP
button.
FIlTER CYClES
When the spa is first powered up, the automatic filter cycle will wait 10 minutes before starting. Your spa will automatically turn the first filter cycle on for
60 minutes on low speed. The second filter cycle will activate for 30 minutes, 12 hours later. The filter cycle icon, F1 or F2 will be displayed in the control
panel during the filter cycle.
NOTe:
The optional
MONarCH
CD-Ozone system only works during the filter cycle.
To modify the length of either filter cycle:
A. Press the SET button until the TOOLS menu is illuminated.
B. Press the TEMP
button to enter the TOOLS submenus.
C. Press the SET button until FILT1 or FILT2 is illuminated on the display.
D. Press the TEMP
button to enter FILT1 or FILT2. F1 or F2 icon will flash.
E. Using the TEMP
or the TEMP
button, adjust the desired filter cycle time, from 0 to 6 hours.
The filter cycle will activate the jet pump on low speed for the entire cycle. When activated, the filter cycle icon on the display is turned on. If
the temperature exceeds the set point by three degrees F for more than three hours, the system will cancel the filter cycle for the remaining
filter cycle time. Should the temperature cool down to 1.5 degrees F (1 degree C) below the set point before the end of the cycle, the cycle
will resume for the rest of the time. Should you use the spa during the filter cycle by placing the jet pump on high speed, the Filter icon and
Jets icon will be on. Once the jet pump has been shut off, a ten minute tranquil mode begins (Filter & Jet icons are off during tranquil mode
while F1 or F2 remain lit). The Filter and Jet icons will come back on once the tranquil mode ends if the filter cycle timer is still on.
17
OPeraTING INSTrUCTIONS
Summary of Contents for PLT1S1001
Page 1: ...VACANZA SERIES 2 0 1 4 O W N E R S M A N U A L ...
Page 39: ......
